–
| Attach lifting device -MP 9-201- as shown into the lifting eyes on the engine and slightly raise wih workshop crane (e.g. V.A.G -1202A-): |
t
| On the belt pulley side: 2. Hole, perforated bar - Pos. 1 |
t
| On the flywheel side: 2. Hole, perforated bar - Pos. 7 |
WARNING Use securing pins on the hooks and rig pins to prevent release. |
|
–
| Attach engine with engine and gearbox mount -MP 1-202 - at assembly stand. |
|
|
|