| Removing and installing parts of the cooling system |
Note | t
| When the engine is warm the cooling system is under pressure. Reduce pressure before repairs. |
| t
| The hose connections are secured with spring-type clips. In the event of repairs only use spring-type clips. |
| t
| Use pliers for spring strap clips to fit the spring strap clips. |
| t
| Always replace seals and gasket rings. |
| t
| The arrows which are on the coolant pipes and the coolant hose ends must stand opposite to each other. |
| Checking the coolant system for tightness → Chapter. |
|
|
|
