skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Replacing valve stem seals > < Grinding in valve seats

Octavia Mk1

Inspect valve guides
Inspect valve guides
Special tools and workshop equipment required
t  Universal dial gauge holder -MP 3-447-
t  Dial gauge
Test sequence
   
–  Insert valve into guide. End of valve stem must be flush with guide.
   Valve rock: max. 1.3 mm
  Note
t  If the wear limit is exceeded, repeat measurement with new valves. If the wear limit is again exceeded, replace valve guides → Chapter.
t  If the valve is replaced when carrying out repair work, use a new valve for the measurement.
  S15-0078

Replacing valve stem seals > < Grinding in valve seats