skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

Analysis: Display group 008, display field 2 - Injection rate (driver's instruction) > < Display group 004 under full load (test drive in 2nd gear coolant temperature not below 75°C)
Display group 008 under full load (test drive in 2nd gear coolant temperature not below 75°C)
   
Display group 008 under full load (test drive in 2nd gear coolant temperature not below 75°C)
Reading measured value block 8 [lt ] Readout on display 
xxx
rpm
xx.x
mg/s
xx.x
mg/s
xx.x
mg/s
 
1234[lt ] Display fieldSpecificationAnalysis
    Injection rate limit based on drawn in air mass (smoke prevention)47.0…60.0 mg/s → Chapter
   Injection rate limit based on engine speed (torque limit)47.0…51.0 mg/s → Chapter
  Injection rate (driver's instruction)65.0…70.0 mg/s → Chapter
 Engine speed2800…3200 rpm---

   

Analysis: Display group 008, display field 2 - Injection rate (driver's instruction) > < Display group 004 under full load (test drive in 2nd gear coolant temperature not below 75°C)