–
| Disconnect plug connection -1- at the injection pump. |
–
| Connect multimeter onto contacts 1 and 2 of the connector holder -2- to measure the resistance. |
| 1.0...1.5 kΩ, angular plug connection (old version) |
| 1.1...1.6 kΩ, rounded plug connection (new version) |
If the specified value is not reached: |
–
| Replace engine speed sender -G28-. |
If the specified value is reached: |
–
| Connect test box -V.A.G 1598/22- or - V.A.G 1598/31- at wiring loom to engine control unit → Chapter. |
If the lines are not found to be faulty: |
–
| Replacing engine control unit -J248- → Chapter. |
|
|
|