Skoda Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Test sequence >
< Check for proper operation
Octavia Mk1
Drive unit
2.0 ltr./85 kW Engine, Fuel Injection and Ignition System
Mixture preparation system, electronic inj.,Gas
Check for proper operation
Test lambda probe G130 and lambda control downstream of catalytic converter (AQY, AZH, AZJ)
Test lambda probe G130 and lambda control downstream of catalytic converter (AQY, AZH, AZJ)
Test lambda probe -G130- and lambda control downstream of catalytic converter (AQY, AZH, AZJ)
Special tools and workshop equipment required
t
Handheld multimeter, e.g. -V.A.G 1526 A oder B-
t
Measuring tool set, e.g. -V.A.G 1594 A, B oder C-
Test conditions
l
Fuse 43 must be o.k.
l
Battery voltage min. 11.5 V.
l
The fuel pump relay must be OK.
l
Coolant temperature at least 80°C ⇒ measured value block 004; display field 3
→ Chapter
.
Drive unit
2.0 ltr./85 kW Engine, Fuel Injection and Ignition System
Mixture preparation system, electronic inj.,Gas
Check for proper operation
Test lambda probe G130 and lambda control downstream of catalytic converter (AQY, AZH, AZJ)
Test sequence >
< Check for proper operation