| Check accelerator pedal position sender (AZH, AZJ) |
| Special tools and workshop equipment required |
| t
| Handheld multimeter, e.g. -V.A.G 1526 A oder B- |
| t
| Measuring tool set, e.g. -V.A.G 1594 A, B oder C- |
| Description of the function |
| The two accelerator pedal position senders -G79- and -G185- are located at the accelerator pedal and pass on the driver input to the engine control unit completely independently of each other (when accelerator is depressed). Both senders are located in a housing. |
| l
| Battery voltage min. 11.5 V. |
|
|
|
