skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

Analysis of display group 002, display field 3 - injection time > < Display group 002 - basic functions - air mass meter
Analysis of display group 002, display field 2 - engine load
   
Analysis of display group 002, display field 2 - engine load
Display -V.A.G 1552 -Rectifying fault
less than 15%
less than 10 % 1)
t  Smaller value can only occur in overrun
greater than 35%
greater than 25% 1)
–  Testing injection valves → Chapter.
–  If necessary, replace spark plugs.
–  Switch off electrical consumers.
–  Turn the steering wheel into its middle position
–  Move selector lever into position “P” or “N” (automatic gearbox).
–  Test air mass meter.
–  Inspecting throttle valve control unit → Chapter.

1) For engines with identification characters AZH, AZJ.
  Note
t  The maximum engine load decreases approximately 10 % for each 1000 m above mean sea level.
t  The maximum engine load decreases by up to 10 % at high temperatures.
t  The following readouts must be reached when driving at full throttle: at 4000 rpm approx. 78 %, at 6000 rpm approx. 75 %.
   

Analysis of display group 002, display field 3 - injection time > < Display group 002 - basic functions - air mass meter