Octavia Mk1
| Display group 055, engine speed control - idling speed stabilisation |
| |||||||||
| Read measured value block 55 → | ← Read-out on display | ||||||||
| xxxx rpm | x.xx g/s xx.xx % 1) | x.xx g/s xx.xx % 1) | xxxx xxxxx 1) | ||||||
| 1 | 2 | 3 | 4 | ← Display fields | Specification | Analysis | |||
| Operating conditions | xxxx xxxxx 1) | → Chapter | |||||||
| Initialisation value idling regulator | -1,50...1,50 g/s -10.0...10.0 % 1) | — | |||||||
| Idling regulator | -2.00...2.00 g/s 2) -10.0...10.0 % 1) | — | |||||||
| Engine speed (idling speed) | — | → Chapter, Display group 001, display field 1 | |||||||
| 1) For engines with identification characters AZH, AZJ. |
| 2) On a new engine the value is in the positive region because of the higher friction, on a run-in engine it is in the negative region. |
Note| t | Re display field 3: 1) |
| t | The display shows to what extent the idling stabilizer has “disinitialised” from the constructively given mean value. On a new engine the value is in the positive region because of the higher friction, on a run-in engine it is in the negative region. |
