Skoda Workshop Service and Repair Manuals > Octavia Mk1 > Drive unit | 2.0 ltr./85 kW Engine, Fuel Injection and Ignition System | Self diagnosis, V.A.G Inspection Service | Self-diagnosis VI | Reading measured value block, display groups 030 to 062 | Display group 060 - adjustment of the throttle valve control unit

Display group 060 - adjustment of the throttle valve control unit

l	Ignition on, engine stopped

l	Control unit in function 04 - initiate basic setting

System in basic setting 60 →

← Read-out on display

x ∠°
xxx % ¹⁾

xx.x V
xxx % ¹⁾

Text
x ¹⁾

Text

← Display fields

Specification

Analysis

Adaption state (ADP runs, ADP O.K. or ADP ERROR)

ADP O.K.

—

Operating state of engine
Counter of learning steps ¹⁾

Idling
0...8 ¹⁾

—

Throttle valve positioner sender -G127 -
Throttle valve angle - Potentiometer 2 -G188-¹⁾

0.0...5.0 V
97...3 % ¹⁾

—

Throttle valve angle
Throttle valve angle - Potentiometer 1 -G187-¹⁾

0...6 ∠°
3...97 % ¹⁾

→ Chapter, Display group 003, display field 3

¹⁾ For engines with identification characters AZH, AZJ.

Note

t	When display group 060 is selected in function 04 “Initiate basic setting”, the engine control unit is adapted to the throttle valve control unit. This adaption must be performed if another throttle valve control unit (or the complete engine), or another engine control unit, has been installed.

t	Carry out the adaptation of throttle valve control unit with the ignition switched on.

t	If the voltage supply has been interrupted (battery disconnected), it is also necessary to carry out adaption → Chapter.