skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Exhaust manifold, exhaust pipe with catalytic converter and attached parts > < Adjusting throttle control cable

Octavia Mk1

Removing and installing parts of the exhaust system
Removing and installing parts of the exhaust system
  Note
t  When performing installation work on the exhaust system, make sure the exhaust system is not mounted with pretension and has adequate clearance from the body. If necessary slacken the double clamp(s) and align the silencer and exhaust pipe so as to create adequate clearance between these components and the vehicle body, and that the weight of the exhaust system is evenly distributed over the hangers.
t  Always replace self-locking nuts.
–  Inspecting catalyst → Chapter.
   

Exhaust manifold, exhaust pipe with catalytic converter and attached parts > < Adjusting throttle control cable