Skoda Workshop Service and Repair Manuals > Octavia Mk1 > Electrical System | Electrical System | Infotainment | Navigation system

Interrogating and erasing fault memory

Special tools and workshop equipment required

t	Vehicle system tester -V.A.G 1552- with cable -V.A.G 1551/3-

–	Switch on ignition.

–	Connect vehicle system tester -V.A.G 1552- and select the address word 37 “Navigation” → Anchor.

Readout on display:

–	Enter 02 for the function “Interrogate fault memory” and confirm the entry with the key Q.

Vehicle system test               HELP

Select function XX

The number of stored faults or “No fault recognised” appears in the display.

If one or several faults are stored:

The stored faults are displayed in sequence.

X faults detected!

Readout on display:

–	Enter 05 for the function “Erase fault memory” and confirm the entry with the key Q.

Note

If the ignition was switched off between “Interrogate fault memory” and “Erase fault memory”, the fault memory is not erased.

Vehicle system test               HELP

Select function XX

Readout on display:

–	-> Press key.

–	Enter 06 for the function “End output” and confirm the entry with the key Q.

–	Rectify the faults displayed by referring to the fault table → Chapter.

If no fault is stored:

–	-> Press key.

Vehicle system test                 ->

Fault memory erased!

Readout on display:

–	Enter 06 for “End output” and confirm the entry with the key Q.

Vehicle system test               HELP

Select function XX

Skoda Workshop Service and Repair Manuals