skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Erasing fault memory > < Fault table

Octavia Mk1

Actuator diagnosis
Actuator diagnosis
  Note
t  The actuator diagnosis can only be performed when the vehicle is stationary and the engine is not running!
t  If a fault is detected during the actuator diagnosis, the dash panel insert must be replaced!
  Note
Depending on the country version, the display is shown in the country-specific unit.
Perform self-diagnosis:
–  Connect the vehicle system tester -V.A.G 1552- and select the address word 17 “Dash panel insert”; ignition is switched on → Chapter.
   
Readout on display:
–  Enter the function 03 “Actuator diagnosis” and confirm the entry with the key Q.
  
Vehicle system test               HELP
Enter address word XX
Readout on display:
The pointer of the rev counter moves across the full range and then indicates approx. 3000.
–  Press → key.
  
Actuator diagnosis
Rev counter
Readout on display:
The pointer of the coolant temperature gauge moves across the full range and then moves to the halfway point.
–  Press → key.
  
Actuator diagnosis
Temp. gauge
Readout on display:
The pointer of the fuel gauge moves across the full range and then moves to the halfway point.
–  Press → key.
  
Actuator diagnosis
Fuel gauge
Readout on display:
The pointer of the speedometer moves across the full range and then indicates approx. 100.
–  Press → key.
  
Actuator diagnosis
Speedometer
Readout on display:
All the segments of the display in the speedometer and in the rev counter are actuated and become visible.
–  Press → key.
  
Actuator diagnosis
Segment test
Readout on display:
The glow period warning light -K29- lights up (only on diesel engines).
–  Press → key.
  
Actuator diagnosis
Glow period warning light -K29
Readout on display:
The coolant temperature/low coolant level warning light comes on.
–  Press → key.
  
Actuator diagnosis
Overheating light
Readout on display:
The brake pad warning light -K32- lights up.
–  Press → key.
  
Actuator diagnosis
Brake pad warning light -K32-
Readout on display:
The fuel reserve warning light - K105- lights up.
–  Press → key.
  
Actuator diagnosis
Fuel reserve warning light -K105
Readout on display:
The oil pressure warning light -K3- lights up.
–  Press → key.
  
Actuator diagnosis
Oil pressure warning light -K3
Readout on display:
The oil level warning light -K38- lights up.
–  Press → key.
  
Actuator diagnosis
00501 /Literature
Readout on display:
The warning light indicating a low wash water level -K106- lights up (if present).
–  Press → key.
  
Actuator diagnosis
Fuel reserve warning light -K106
Readout on display:
–  Press → key.
  
Actuator diagnosis                   →
00502 /Literature
Readout on display:
The dual circuit and hand brake system warning light -K7- lights up.
–  Press → key.
  
Actuator diagnosis                   →
Dual circuit and hand brake system warning light -K7
Readout on display:
The seat belt warning light -K19- lights up.
–  Press → key.
  
Actuator diagnosis                   →  
Seat belt warning light -K19
Readout on display:
The gong is operated. A gong signal sounds at intervals.
–  Press → key.
  
Actuator diagnosis                   →
Gong
Readout on display:
A continuous warning signal sounds.
–  Press → key.
  
Actuator diagnosis                   →
Buzzer/gong -H3
Readout on display:
The actual values are again shown on the display of the dash panel insert.
–  Press → key.
  
Actuator diagnosis                   →
 End
Readout on display:
–  End output (function 06).
  
Vehicle system test               HELP
Enter address word XX

Erasing fault memory > < Fault table