skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Reading measured value block > < Ending output

Octavia Mk1

Coding dash panel insert
Coding dash panel insert
When coding the dash panel insert, select:
–  additional equipment
–  country versions
–  service intervals
–  speedometer calibration
Work sequence when coding:
–  Enter function 07.
–  Confirm the entry with key Q.
   
Readout on display:
–  Enter code number by referring to table of codes and confirm entry with key Q.
Table of codes:
  
Code control unit                 Q
Enter code number XXXXX     (0–32000)
XX   Additional equipment (is read in)
01
02
04
08
16		   Brake pad warning light
seat belt warning light
warning light for fluid level in the windscreen washer fluid reservoir
warning light for light bulb failure - only for L&K
warning light indicating an open door - only for L&K
 X  Country version
 0
1
2
3
4
5
6
7		  Germany
Europe and Rest of World
USA
Canada
Great Britain
Japan
Saudi Arabia
Australia
  X Service intervals
  0
1
2
3		 fixed interval (QG0)
extended interval (QG1)
extended interval with fixed limit (QG2)
without service interval
   Xspeedometer calibration
   1
2




3

4		= for engine 1.4/55 kW
= for engine 1.4/44 kW
1.6/74 - 75 kW with automatic gearbox
2.0/85 kW
1.8/110 - 132 kW
1.9/66 - 81 kW TDI
= for engine 1.9/50 kW SDI
1.6/74 - 75 kW with manual gearbox
= for engine 1.9/74 kW PDi
1.9/96 kW PDi

   
The control unit coding appears on the display, e.g. 05112.
–  Press → key.
  
1U0920810A COMBI+IMMOBILISER   VDO X06   →
Coding    05112             WSC  00123
Readout on display:
–  End coding with → key.
  
TMBCC11U01243077   SKZ720Y0531556      →

      

      

    
      

      

    
Readout on display:
– 
          End output (function 06).
Example:
Should be selected: brake pad warning light, warning light for fluid level in the windscreen washer fluid reservoir, Europe, extended service interval, engine 1.9 TDI 01000+04000+00100+00010+00002 = 05112 the number 05112 is coded

      		 
      
    
Vehicle system test               HELP
Select function XX

      

      

    


Reading measured value block >
< Ending output