skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Dash panel insert (MY 01 ?) > < Removing and installing taximeter HALE

Octavia Mk1

Removing and installing printer HALE
Removing and installing printer HALE
  WARNING
Disconnect earth strap from the battery before commencing work on the electrical system.
  Note
t  Before disconnecting the battery determine the code of radio sets fitted with anti-theft coding.
t  After connecting the battery, perform the following:
–  on vehicles with radio encoding, carry out the coding,
–  set clock,
–  initialise power windows on vehicles fitted with power windows → Octavia.
t  After installing the taximeter in the vehicle, a new original lead seal must be used.
Removing
   
–  Dispose of the lead seal and screw out the screw -2-.
–  Remove cover -1- and disconnect plug connections.
  S90-0064
–  Remove the screws -2- and take the printer -1- out of the vehicle.
Install
–  Installation is carried out in the reverse order.
  S90-0063

Dash panel insert (MY 01 ?) > < Removing and installing taximeter HALE