skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

Procedure when changing the lock set or the immobiliser control unit > < Transponder defective and/or key loss
Replacing reader coil
Replacing reader coil
t  The reader coil is firmly connected to the lock cylinder and cannot be replaced separately.
t  The reader coil must be exchanged together with the lock cylinder.
t  In order to establish the mobility as quickly as possible, proceed as follows:
–  Remove lock cylinder → Chapter.
–  Install the spare lock cylinder with a random locking number and adapt the door locks.
  Note
The customer must operate the vehicle with two vehicle keys during the delivery period.
–  After delivery the spare lock cylinder must be replaced with the ordered vehicle-specific lock cylinder.
   

Procedure when changing the lock set or the immobiliser control unit > < Transponder defective and/or key loss