skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Performing the log-in procedure > < Ending output

Octavia Mk1

Reading measured value block
Reading measured value block
   
Readout on display:
–  Enter 08 and confirm with the key Q.
  
Vehicle system test               HELP
Select function XX
Readout on display:
–  Enter code number of the desired display group and confirm with the key Q.
  
Read measured value block     HELP
Enter display group number XXX
Measured value block 022
Reading measured value block 22→← Readout on display
1112 
    Number of initialised keys
l  1 to 8 keys
   Key code read
l  1 = yes
l  0 = no
  Engine control unit communicates
l  1 = yes
l  0 = no
 Start authorised
l  1 = yes
l  0 = no

   
Measured value block 023
Reading measured value block 23→← Readout on display
1112 
    Status of immobiliser
l  1 = Basic factory setting
l  2 = Control unit ready for adaptation
l  3 = Control unit is adapted, keys are learned
l  4 = Basic setting of replacement control unit
l  5 = The codes are read into the control unit (if these agree with the code of the engine control unit = move on to status 6)
l  6 = Keys can be adapted
l  7 = Key adaptation
   programmed key code (key is learned)
l  1 = yes
l  0 = no
  Key locking (2nd generation - no, 3rd generation - yes)
l  1 = yes
l  0 = no
 Drive code of the key
l  1 = yes
l  0 = no

   
Measured value block 024
Reading measured value block 24→← Readout on display
0000 
    Blocking period for reading key code, after 20x terminal 15 ''on'' with unauthorised key
l  0 to 10 minutes
   Blocking period of emergency release
l  0 to 255 minutes (FAIL lights up on the dash panel insert)
  Blocking period of adaptation via channel 50
l  0 to 255 minutes (FAIL lights up on the dash panel insert)
 Blocking period of PIN entry
l  0 to 255 minutes (FAIL lights up on the dash panel insert)

   

Performing the log-in procedure > < Ending output