skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing the licence plate illumination > < Removing and installing the light bulb from the lamp holder

Octavia Mk1

Removing and installing rear light
Removing and installing rear light
Removing:
–  Open tailgate.
–  Remove side trim panel.
   
–  Disconnect plug connection -1-.
–  Unscrew the fixing nuts M5 -arrows- (3 Nm).
–  Pull the complete rear light outwards from the tail end of the vehicle.
Installing:
  Note
When installing ensure that the seal between the body and the rear lamp housing provides a proper seal.
–  Installation is carried out in the reverse order.
–  Before tightening the nuts, match up the rear light to the bodywork (uniform gap size all round).
  S94-0048

Removing and installing the licence plate illumination > < Removing and installing the light bulb from the lamp holder