skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing the ignition/high voltage unit BOSCH 2.3 > < Changing light bulbs in the headlight

Octavia Mk1

Removing and installing the D2S discharge lamp
Removing and installing the D2S discharge lamp
Removing:
–  Remove the front headlight → Chapter
–  Remove the scuttle.
   
–  Slacken the ignition unit from the discharge lamp -5-.
–  Remove holder of discharge lamp -4- and take out discharge lamp. While doing so do not touch the glass with the bare hand!
Install
–  Installation is carried out in the reverse order.
  S94-0116

Removing and installing the ignition/high voltage unit BOSCH 2.3 > < Changing light bulbs in the headlight