Skoda Workshop Service and Repair Manuals > Octavia Mk1 > Heating, Air conditioning | Heating, Air conditioning | Air conditioner | Climatronic - Air conditioner with automatic regulation)

Middle vent temperature senderG191

Middle vent temperature sender -G191-

Vehicles with mapped cooling

Removing

–	Remove the glove compartment → Body Work; Rep. Gr.70

–	Disconnect plug.

–	Turn sender -1- by 90° -arrow- and take out.

Install

Installation is carried out in the reverse order.

Inspection

–	Measure the resistence between the contacts of the sender using a multimeter.

Nominal value at 25°C: 9.7... 10,3 kΩ

If the specified value is not reached:

–	Replace middle vent temperature sender.

If the specified value is reached:

–	Inspect wiring according to the current flow diagram and repair if necessary → Current flow diagrams and Fitting locations.

If wiring is o.k.:

–	Check climatronic control unit → Chapter; replace if necessary → Chapter.

Skoda Workshop Service and Repair Manuals