| Drive train settings and code lettering |
| 1 - | Drive train pairing number (8033) |
| 2 - | Shank taper wheel dimension (D = - 3) |
| –
| Adjustment dimension for series |
| 3 - | Interlocking clearance Sd = 0.15 |
| 4 - | Deviation “r” relative to master setting on testing machine used at production. Deviation -r- is always given in 1/100 mm. |
| Example: “38” means r = 0.38 mm |
| Ro - Length of master setting used on testing machine “Ro” = 36.20 mm |
| Actual gap between head bevel gear axis and front side of the shank bevel gear at point of smoothest running for this particular drive train |
|
|
|
