Octavia Mk1
| III - Summary of components - Control cables |
Note| Grease bearing and friction surfaces with Polycarbamide Grease - G 052 142 A2-. |
| 1 - | Shift cable |
| q | pressed onto the shift lever guide |
| q | Fitting position → Chapter |
| 2 - | Selector cable |
| q | at selector angle plate |
| q | Fitting position → Chapter |
| 3 - | Lock washer |
| 4 - | Lock washer |
| q | do not damage cables when removing |
| 5 - | Shift housing |
| 6 - | Cable support |
| 7 - | Grommet |
| q | for mounting of cable support to gearbox |
| 8 - | Spacer bush |
| 9 - | 20 Nm |
| 10 - | Cable lock |
| q | for selector cable |
| 11 - | Cable lock |
| q | for shift cable |
| 12 - | Circlip |
| 13 - | Bushing |
| 14 - | Reversing lever |
| q | Fitting position → Anchor |
| 15 - | Sliding shoe |
| 16 - | Gearshift lever |
| q | with balancing weight |
| q | insert in such a way that the interrupted spacing of the teeth matches the gearshift shaft in the same position |
| q | after installing set shift mechanism → Chapter |
| q | Fitting position → Anchor |
| 17 - | 20 Nm |
