Octavia Mk1
| Summary of components - Hydraulics |
| 1 - | Brake fluid reservoir |
| 2 - | Tubing |
| 3 - | Master cylinder |
| q | removing and installing → Chapter |
| 4 - | Support |
| q | only replace if the master cylinder has been removed |
| q | dismantling → Fig. |
| q | push on → Fig. |
| 5 - | Clutch pedal |
| q | removing and installing → Chapter |
| 6 - | 25 Nm |
| q | self-locking |
| q | always replace → Electronic Catalogue of Original Parts |
| 7 - | O-ring |
| q | pull onto line connection |
| q | insert with brake fluid |
| 8 - | Tube-hose line |
| q | assign according to → Electronic Catalogue of Original Parts |
| 9 - | Support |
| q | Mounted at the structure |
| 10 - | Dust cap |
| 11 - | Bleed valve |
| q | Bleed the clutch system → Chapter |
| 12 - | Slave cylinder |
| q | removing and installing → Chapter |
| 13 - | Screw, 20 Nm |
| 14 - | Gearbox |
| 15 - | Clamp |
| q | to remove the tube-hose line, pull out clamp |
| 16 - | O-ring |
| q | pull onto line connection |
| q | insert with brake fluid |
| 17 - | Cable support |
| 18 - | Support |
| q | attach to cable support |
| 19 - | Clamp |
| q | to remove the tube-hose line, pull out clamp |
|
|
|
|
