Octavia Mk1
Summary of components - Removing and installing gearbox housing and shift mechanism |
1 - | 25 Nm |
2 - | Flange shaft with pressure spring |
q | removing and installing → Chapter |
q | complete → Chapter |
3 - | 25 Nm |
q | for reverse shaft support |
q | self-locking |
q | always replace → Electronic Catalogue of Original Parts |
4 - | O-ring |
q | always replace → Electronic Catalogue of Original Parts |
5 - | Bearing pins |
6 - | 25 Nm |
7 - | 30 Nm |
q | for reverse shaft support |
q | self-locking |
q | always replace → Electronic Catalogue of Original Parts |
8 - | 25 Nm |
9 - | Screw cap |
10 - | Gearbox housing |
q | repairing → Chapter |
11 - | Clutch housing |
q | repairing → Chapter |
12 - | 25 Nm and torque a further 90° |
q | always replace → Electronic Catalogue of Original Parts |
13 - | Shift mechanism as of 05.99 |
q | (Gearshift shaft with gearshift cover) |
q | disassembling and assembling → Chapter |
14 - | Shift mechanism up to 04.99 |
q | (Gearshift shaft with gearshift cover) |
q | disassembling and assembling → Chapter |
15 - | 25 Nm |