Skoda Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Removing the gearbox >
< Check for proper operation
Octavia Mk1
Power transmission
Manual Gearbox 02J
Gearbox mechanics,operation, construction,diff.
Removing and installing the gearbox
Removing and installing the gearbox
Removing and installing the gearbox
Special tools and workshop equipment required
t
Alignment rails -MP3-457 (VW 457)- (change
→ Anchor
)
t
Supporting device for engine -MP3-470 (3300 A)-
t
Gearbox attachment device -MP3-478 (3336)-
t
Supporting device -MP9-200 (10-222A)-
t
Gearbox mount -3282-
t
Adjusting plate -3282/8-
t
Grease for the plug serration of the clutch disc -G 000 100-
Change
alignment rail -MP3-457 (VW 457)-
–
The alignment rail -MP3-457 (VW 457)- is required when removing and installing the gearbox.
An additional hole
-arrow-
is necessary for attaching the alignment rail -MP3-457 (VW 457)- to the assembly carrier.
Dimensions in mm.
–
If this hole is not yet present, a hole of 8.5 mm Ø
-arrow-
must be drilled into the alignment rail -MP3-457 (VW 457)-.
Power transmission
Manual Gearbox 02J
Gearbox mechanics,operation, construction,diff.
Removing and installing the gearbox
Removing the gearbox >
< Check for proper operation