Octavia Mk1
Fitting location of shift mechanism |
A - | Shift cable for shift movement |
B - | Selector cable for selector movement |
C - | Heat shield |
q | take off before removing the shift mechanism. |
Arrow -A- Shift movement |
Arrow -B- Selector movement |
1 - | Gearbox shift lever |
2 - | Reversing lever |
Note
t | On models fitted with a coded radio set, pay attention to the coding. |
t | Disconnect earth strap at battery before carrying out work on the shift mechanism in the engine compartment → Electrical System → Rep. Gr.27. |
t | When the battery is reconnected, pay attention to the work after connecting the battery → Electrical System → Rep. Gr.27. |
t | Do not kink the control cables. |
t | Grease all bearing and contact surfaces with Polycarbamide Grease -G 052 142 A2-. |
I - | Summary of components - removing and installing gearshift knob and collar → Chapter |
II - | Summary of components - repairing shift lever and shift housing → Chapter |
III - | Removing and installing control cables - Summary of components → Chapter |
Removing and installing shift mechanism → Chapter |
Setting the shift mechanism as of 05.99 → Chapter |
|