Skoda Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Removing and installing shift mechanism|Install >
< Removing and installing shift mechanism
Octavia Mk1
Power transmission
Manual Gearbox 02J
Gearbox mechanics,operation, construction,diff. / Repairing shift mechanism up to 04.99 / moving_and_installing_shift_mechanism/">Removing and installing shift mechanism
Removing
Removing
Removing
–
Remove air filter
→ Engine
→ Rep. Gr.23
or
→ Engine
→ Rep. Gr.24
.
–
Remove balancing weight
-A-
and shift cable
-B-
of gearbox shift lever.
–
Remove shift cable with washer and square nut (self-locking).
–
Detach selector cable from driver/relay lever
-C-
, to do so raise lug in direction of arrow.
–
Disconnect the cable support from the gearbox
-arrows-
, if necessary first unclip tube-hose line at cable support.
–
Pull out the collar for the shift lever towards the top
-arrow-
.
–
Open warm-type clamp
-arrow-
and remove gearshift knob together with the cover.
–
Remove sound absorption, if present.
–
Now unscrew fixing nuts attaching the shift housing
-arrows-
.
–
Release clamping sleeve
-arrow A-
and separate the exhaust system.
–
Remove the cross member
-B-
below the exhaust system.
–
Loosen the heat shield
-C-
in the front area.
–
Remove heat shield
-D-
.
–
Release both lower fixing screws for the shift housing.
–
Lower shift housing and pull out complete with cables to the rear.
Power transmission
Manual Gearbox 02J
Gearbox mechanics,operation, construction,diff. / Repairing shift mechanism up to 04.99 / moving_and_installing_shift_mechanism/">Removing and installing shift mechanism
Removing
Removing and installing shift mechanism|Install >
< Removing and installing shift mechanism