skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Setting the shift mechanism up to 04.99 > < Summary of components - repairing shift housing

Octavia Mk1

Summary of components - repairing shift lever
   
Summary of components - repairing shift lever
  Note
Grease bearing and friction surfaces with Polycarbamide Grease -G 052 142 A2-.
1 - Selector cable
q   at selector angle plate
2 - Shift cable
q   to shift lever
3 - Selector angle plate
4 - 15 Nm
q   for bearing bolt to bearing plate
5 - Bearing bolt
6 - Bearing plate
7 - 20 Nm
q   for bearing plate to shift housing
q   self-locking
q   always replace → Electronic Catalogue of Original Parts
8 - Cap
q   mount → Fig.
9 - Bushing
q   fits in one position only
10 - Selector housing
q   Insert into bearing plate after assembly of the complete shift lever
11 - Bush
12 - Leg spring
13 - Guide bush
q   lock onto bushing Pos. 8
14 - Lock washer
q   removing and installing → Fig.
15 - Spacer bush
16 - Pressure spring
17 - Lock washer
q   removing → Fig.
18 - Bushing
q   fits in one position only
19 - Shift lever
q   with shift lever guide and insulating washer
20 - Shock absorber
q   Fitting position: the stud -arrow- points to the shift lever guide
q   mount → Fig.
21 - Split pin

   
mount cap
–  Press on laterally -arrow-.
–  Press together opening to a slot.
  Note
If necessary warm up cap (e.g. in hot water).
  V34-1974
Removing and installing circlip
–  When removing and installing the circlip -A- pull the shift lever in -direction of arrow A- while simultaneously pressing the spacer bush down with a screwdriver up to the stop in -direction of arrow B-.
  Note
Do not twist spacer bush when pressing down with screwdriver. Release the mounting slot in shift lever for circlip carefully.
  V34-2958
Removing circlips for selector angle plate and shift lever guide/selector housing
–  Lift retaining clip in the -direction of the arrow-.
  N34-0052
Mount shock absorber
Fitting position:
The stud -arrow- at shock absorber -1- points to shift lever guide -2-.
  S34-0226

Setting the shift mechanism up to 04.99 > < Summary of components - repairing shift housing