Mounting sequence - repair bearing of shank bevel gear |
Special tools and workshop equipment required |
t
| Pressure plate -MP3-406 (VW 401)- |
t
| Pressure plate -MP3-407 (VW 402)- |
t
| Pressure spindle -MP3-408 (VW 412)- |
t
| Pressure washer -MP3-413 (VW 510)- |
t
| Multi-purpose tool -MP3-419 (VW 771)- |
t
| Extraction hook -MP3-419/37 (VW 771/37)- |
t
| Pressure spindle -MP3-423 (VW 407)- |
t
| Pipe section -MP3-429 (2010)- |
t
| Pressure spindle -MP3-448 (VW 408A)- |
t
| Thrust piece -MP3-472 (3118)- |
t
| Thrust piece -MP3-4014 (VW 432)- |
t
| Base -MP6-407 (40 - 103)- |
t
| Assembly device -MP6-414 (3253)- |
t
| Assembly stand -MP9-101- |
t
| Drive bushing -T30024 (VW 192)- |
t
| Thrust piece -T30042 (2050)- |
t
| Gearbox mount -T30097 (T10108)- |
t
| Tapered-roller bearing extractor -V.A.G 1582- |
t
| Interior extractor 56...70 mm, e.g. -Kukko 21/8- |
t
| Locking agent -D 154 000 A1- |
t
| Commercially available torque gauge 0...600 Ncm |
|
|
|