skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

Removing the gearbox > < Setting shift mechanism, gearbox with locking angle (as of gearbox manufacturing date 19 05 3)
Removing and installing the gearbox
Removing and installing the gearbox
Special tools and workshop equipment required
t  Gearbox attachment device -MP3-478 (3336)-
t  Hose clamps -MP7-602 (3094)-
t  Supporting device -MP9-200 (10-222 A)-
t  Gearbox mount -3282-
t  Adjusting plate -3282/27-
t  Engine and gearbox jack e.g. -V.A.G 1383A-
t  Grease for the plug serration of the clutch disc -G 000 100-
t  Catch pan
  Note
t  All cable straps which are detached or cut open when removing, should be fitted on again in the same place when installing.
t  After the battery earth strap is disconnected and re-connected, carry out additional operations → Electrical System → Rep. Gr.27.
   

Removing the gearbox > < Setting shift mechanism, gearbox with locking angle (as of gearbox manufacturing date 19 05 3)