skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing - engines with identification characters AEH, AKL > < Removing and installing engine

Octavia Mk1

Removing and installing engine covers
Removing and installing engine covers
Removing
   
–  Lever out the plugs -1- at the points marked with arrows and slacken the securing nuts -2- for both engine covers.
–  Slacken the securing nut -3- and remove the engine covers.
Install
Installation is carried out in the reverse order. Pay attention to the following:
–  Tighten securing nuts to 8 Nm and press in the plug.
  S24-0260

Removing - engines with identification characters AEH, AKL > < Removing and installing engine