Roomster
| Trailer coupling |
| 1 - | Trailer coupling frame |
| Removing: |
| – | Remove the rear bumper → Chapter. |
| – | Remove power socket. |
| – | Remove screws (Pos. 8). |
| – | Pull out trailer coupling towards the rear. |
| Installing: |
| – | Installation is carried out in the reverse order. |
| 2 - | Cap |
| 3 - | Trailer arm |
| Removing and installing: |
| – | Carry out the removal and installation according to the instructions of the manufacturer of the trailer coupling. |
| 4 - | Blind plug |
| t | Insert into the hole after removing the trailer arms. |
| 5 - | 2.5 Nm |
| 6 - | Power socket |
| Removing: |
| – | Remove screws (Pos. 5). |
| 7 - | Wiring loom |
| 8 - | 70 Nm |