skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Drive unit > < Covers and front seat upholstery

Roomster

Summary of components of cover for headrest
   
Summary of components of cover for headrest
1 -  → AnchorProtective cover
2 -  → AnchorLoad bearing part of the headrest
3 - Foam padding of the headrest
Removing:
–  Remove the protective cover of the headrest (Pos. 1).
–  Remove the cover of the headrest (Pos. 4).
–  Remove the foam padding of the headrest.
Installing:
–  Installation is carried out in the reverse order.
4 - Cover of the headrest
Removing:
–  Remove the protective cover (Pos. 1).
–  Remove the cover from the foam padding of the headrest.
Installing:
–  Installation is carried out in the reverse order.

Protective cover of the headrest
Removing:
   
–  Insert e.g. a screwdriver under the protective cover at the point of the -arrows- and release the catches of the protective cover (Pos. 2).
–  Cover of the headrest (Pos. 1).
–  Load bearing part of the headrest.
Installing:
–  Carefully clip the protective cover into the load bearing part of the headrest.
Load bearing part of the headrest
Removing:
–  Remove cover and foam padding of the headrest.
  S74-0106
–  Carefully release the catches -arrows- using for example a screwdriver.
Installing:
–  Insert the pipe frame into the load bearing part and carefully clip in the catches.
  S74-0105

Drive unit > < Covers and front seat upholstery