skoda Workshop Repair Guides

Skoda Roomster Workshop Service & Repair Manuals

ABOUT US
Engine cylinder head, valve gear > < Disassembling and assembling pistons and conrods

Removing and installing cylinder block, flywheel and sealing flange

Removing sealing flange with rotor
Removing sealing flange with rotor
  Note
These work sequences with the engine removed are shown for purposes of clear presentation. The work sequences are identical with the engine installed and gearbox removed.
–  Remove flywheel or driver disc.
–  Remove intermediate plate.
–  Position crankshaft to TDC for cylinder 1 → Chapter.
–  Removing the oil pan → Chapter.
   
–  Remove engine speed sender -arrow-.
–  Unscrew the fixing screws of the sealing flange.
  S13-0487
–  Screw 3 screws M6x35 into the threaded bores of the sealing flange -arrows-.
–  Press out sealing flange together with rotor from the crankshaft by alternately screwing the screws into the sealing flange.
  S13-0488

Engine cylinder head, valve gear > < Disassembling and assembling pistons and conrods