skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Contact assignment on the CD changer > < CD changer

Roomster

Removing and installing CD changer
Removing and installing CD changer
The CD changer is located below the glove box/front passenger seat.
Special tools and workshop equipment required
t  Release tool -T10057-.
Removing
  Note
Before removing the changer, take out all the CDs remaining in the unit → Operating Instruction Roomster.
–  Switch off the radio, all electrical components and take out the ignition key.
   
–  Position the release tool -T10057- in the release slot, as shown, until it clicks into position.
–  Pull CD changer out of the bracket.
–  Disconnect the plug connection.
  Note
t  The release tool -T10057- must not be pushed to the side or tilted.
t  In order to pull off the release tool - T 10057, press in the side catches at the CD changer.
Install
–  Installation is carried out in the reverse order.
  S91-0131

Contact assignment on the CD changer > < CD changer