skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Exhaust manifold, exhaust pipe with catalytic converter and attached parts > < Repairing the injection system

Superb

  • 2.0/85 kW engine
  • Exhaust system
  • Removing and installing parts of the exhaust system

Removing and installing parts of the exhaust system
Removing and installing parts of the exhaust system
  Note
t  After performing installation work on the exhaust system, make sure the exhaust system is not mounted under tension and has adequate clearance from the vehicle body. If necessary slacken the double clamp(s) and collar clamp and align the silencer and exhaust pipe so as to create adequate clearance between these components and the vehicle body, and that the weight of the exhaust system is evenly distributed over the hangers.
t  Align the hangers in such a way that they have a preloading of 7...9 mm for a cold exhaust system → Fig..
t  Always replace self-locking nuts.
   

  • 2.0/85 kW engine
  • Exhaust system
  • Removing and installing parts of the exhaust system

Exhaust manifold, exhaust pipe with catalytic converter and attached parts > < Repairing the injection system