Superb
| Summary of components of door handle and door lock |
| 1 - | Door lock |
| q | the door lock can only be removed together with the assembly carrier |
| q | removing and installing → Chapter |
| 2 - | Control cable |
| q | serves to release the lock |
| 3 - | Mounting bracket |
| q | screwed and riveted to the door lock |
| 4 - | Clamp |
| q | Removing: |
| l | Door handle, lock cylinder housing and assembly carrier have been removed. |
| – | Remove screw Pos. 5 push the clamp slightly back and remove from door. |
| q | Installing: |
| Installation is carried out in the reverse order. |
| 5 - | 5 Nm |
| 6 - | Door handle |
| q | removing and installing → Chapter |
| 7 - | Cap |
| 8 - | Housing |
| q | removing → Chapter |
| 9 - | Base |
| 10 - | Screw |
| q | Releasing this screw unlocks the catch of the housing Pos. 8 and the housing can then be removed from the clamp Pos. 4. |
| q | Do not tighten screw without the housing being in position. The catch could fall inside the door. |
