| –
| Turn brake light switch -2- 45° to the left and remove from bracket -1-. |
| 1 - | Mount for foot controls |
| 2 - | Brake light switch -F- with brake pedal switch -F47- |
Note | t
| The brake light switch may only be installed once to ensure that it has an adequately tight fit. |
| t
| The contact surface which the tappet is to touch should be greased using polycarbamide grease -G 052 142 A2- before installing the brake light switch. |
| l
| Brake pedal not actuated |
| –
| Guide the brake light switch through in the assembly opening and install by turning it 45° to the right. |
| The tappet will be automatically set up by the brake light switch during assembly. |
| –
| After installing the brake light switch, check whether brake pedal is in the end position (release position). |
|
|
|
