skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

Installing the torque converter > < Removing and installing gasket ring for torque converter
Draining the torque converter
Draining the torque converter
Special tools and workshop equipment required
t  Oil aspirator unit, for example -V.A.G 1358 A-
t  Oil aspiration probe, for example -V.A.G 1358 A/1-
   
If the ATF has been contaminated with metal abrasion, or if the gearbox has had a major overhaul, the torque converter should be drained as follows:
–  Drain off the ATF from the torque converter using an oil aspiration unit, for example -V.A.G 1358 A- and oil aspiration probe, for example -V.A.G 1358 A/1-.
  N32-0036

Installing the torque converter > < Removing and installing gasket ring for torque converter