skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

Ignition system, glow plug system > < Inspecting the exhaust system for leaktightness
Secondary air pump motor - summary of components
   
Secondary air pump motor - summary of components
  WARNING
When undertaking all installation work, particularly in the engine compartment due to its cramped construction, please observe the following:
t  Lay lines of all kinds (e.g. for fuel, hydraulic fluid, the active charcoal container-unit, cooling fluid and refrigerant, brake fluid, vacuum) and electrical lines in such a way that the original line guide is re-established.
t  Ensure that there is adequate free access to all moving or hot components.
  Note
Secondary air pump relay -J299- → Fig.
Connecting pipe and combination valve - summary of components → Chapter
1 - Secondary air pump motor -V101-
2 - 10 Nm
3 - Support
q   for secondary air pump motor -V101-
4 - 10 Nm
5 - Support
q   for the catch pan on the air-conditioning system
6 - Connector
q   black, 2 pin
q   for secondary air pump motor -V101-
7 - O-ring
q   replace if damaged
8 - Pressure hose
q   check for firm seating
q   press together at front to unlock
9 - To the connecting pipe
q   → Item
10 - Air intake hose
q   check for firm seating
q   press together at front to unlock
11 - From the top part of the air filter
q   → Chapter
12 - frame side rail at the front on the right

   

Ignition system, glow plug system > < Inspecting the exhaust system for leaktightness