skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

The self-diagnostic function of the dash panel insert > < Removing and installing the cruise control (CC)
Removing and installing the icebox
Removing and installing the icebox
  Note
Ensure that you take the relevant safety measures when manipulating, repairing and disposing of the icebox.
Removing
–  Switch off the cooling system for the icebox.
–  Open the lid of the icebox.
   
–  Pull on the securing mechanism -1-.
–  Push inwards on the upper wall of the icebox in -direction A- and push the icebox into the luggage compartment -arrow B-.
–  Disconnect the plug connector in the luggage compartment under the icebox.
Install
–  Push the icebox onto the luggage compartment wall and connect up the plug connector.
  S90-0087
–  Pull on the securing mechanism -1-.
–  Close the lid of the icebox.
–  Seat the icebox onto the luggage compartment wall into its holder below.
  S90-0087
–  Pull the icebox forwards up to the stop -arrow A-, push from the inside on the upper wall -arrow B-, pull the box towards oneself again and then push downwards -arrow C-.
  S90-0088
–  Push in the securing mechanism -1- inwards.
  S90-0087

The self-diagnostic function of the dash panel insert > < Removing and installing the cruise control (CC)