skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Setting park position of windscreen wiper blades > < Removing wiper motor

Superb

Installing wiper motor
Installing wiper motor
–  First of all plug in the connector to the wiper motor and run it until it is in park position by operating the wiper switch.
   
–  Unplug the connector again and attach the wiper motor with the securing screws -3- (6 Nm).
–  Fit the crank and align in such a way that the rods -1- make a line.
–  Tighten hexagon nut -2- (18 Nm).
–  Press rods -1- onto the crank again.
  N92-0093

Setting park position of windscreen wiper blades > < Removing wiper motor