Baja F4-2.5L SOHC (2003)
16. Remove baffle plate.
INSTALLATION
CAUTION: Before installing oil pan, clean sealant from oil pan and engine block.
1. Make sure seal (A) is facing to the direction shown in the figure below and installed on baffle plate securely.
2. Install baffle plate.
Tightening torque: 6.4 Nm (0.65 kgf-m, 47 ft. lbs.)
3. Install oil strainer onto baffle plate.
CAUTION: Replace O-ring with a new one.
Tightening torque: 10 Nm (1.0 kgf-m, 7 ft. lbs.)