Baja F4-2.5L SOHC (2003)
4. Apply fluid gasket to mating surfaces and install oil pan.
Fluid gasket: Part No. 004403007 THREE BOND 1215 or equivalent
Tightening torque: 5 Nm (0.5 kgf-m, 3.6 ft. lbs.)
5. Lower engine onto front crossmember.
6. Tighten nuts which secure front cushion rubber onto front crossmember.
Tightening torque: 69 Nm (7.0 kgf-m, 51 ft. lbs.)
7. Install front and center exhaust pipes.
8. Install under cover.
9. Lower the vehicle.
CAUTION: When lowering vehicle, wire rope must be released at the same time.
10. Remove lifting device and steel cables.