Forester F4-2.5L SOHC (2004)
Power Trunk / Liftgate Lock Actuator: Service and Repair
Rear Gate Latch Lock Actuator
REMOVAL
1. Remove the rear gate latch assembly.
2. Remove three pawls, and then remove the rear gate latch lock actuator from rear gate latch assembly.
CAUTION: Do not use excessive force to remove the rear door latch lock actuator.
The pawl surroundings of rear gate latch assembly will be deformed.
INSTALLATION
Install in the reverse order of removal.
CAUTION: Be sure to align the lever groove of rear gate latch assembly and actuator lever.
NOTE: Make sure the lock works properly after installation.