Forester F4-2.5L SOHC (2004)
Stabilizer Bushing: All Technical Service Bulletins
Steering/Suspension - Front Stabilizer Bar Rubbing Noise
NUMBER: 05-42-08
DATE: 11/24/08
APPLICABILITY:
2003-2008MY Forester
SUBJECT:
Front Stabilizer Bar Bushings
Introduction
If you encounter a rubbing type noise coming from the front stabilizer bar, especially at low ambient temperatures, the stabilizer bar bushings may need
to be replaced. A modification was made using a different material that is more durable which will eliminate the noise.
PART INFORMATION
PART IDENTIFICATION
Repair Procedure/Information
Refer to the applicable Service Manual for replacement procedure.
Make sure stabilizer bar surface is clean prior to installing new bushing.
When installing new style, both sides should be replaced at the same time.
Warranty/Claim Information
For vehicles within the Basic New Car Limited Warranty period, refer to the Warranty Wizard(TM) for claim information.