Forester S F4-2.5L DOHC (1998)
Hydraulic Control Unit: Service and Repair
REMOVAL
1) Disconnect ground cable from battery.
2) Remove air intake duct from engine compartment to facilitate removal of ABSCM&H/U.
3) Use an air-gun to get rid of water around the ABSCM&H/U.
CAUTION:
^
The contact will be insufficient if the terminal gets wet.
4) Pull on the lock of the ABSCM&H/U connector to remove it.
5) Disconnect connector from ABSCM&H/U.
CAUTION:
^
Be careful not to let water or other foreign matter contact the ABSCM&H/U terminal.
6) Unlock cable clip.
7) Disconnect brake pipes from ABSCM&H/U.
CAUTION:
^
Wrap brake pipes with vinyl bag to avoid spilling brake fluid on vehicle body.