Hatchback 4WD F4-1781cc 1.8L (1983)
FIGURE 2 - Hold the clutch hub from turning with a clutch hub spanner wrench.
1.) Hold the clutch hub from turning with a clutch hub spanner wrench. (SOA 624 878 or equivalent). Remove compressor shaft nut. (See Figure 2)
FIGURE 3 - CLUTCH HUB PULLER
2.) A clutch hub puller (SOA 624 880 or equivalent) can now be used to remove outer friction clutch hub. Thread the clutch hub puller into the clutch
hub. Turn the clutch hub puller center bolt clockwise while holding the clutch hub stationary with the clutch hub spanner wrench. (See Figure 3).
FIGURE 4 - COMPRESSOR SHAFT
