subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Metering Rod, Carburetor > < Carburetor - Surging After Hot Restart|Page 1379
Page 4
background image

FIGURE 5

6.

Remove plug from front of carburetor and install new hose number 14 where shown in Figure 5.

7.

Remove plug from carburetor top and install new hose number 21 where shown in Figure 5.

8.

Remove plug from bottom of air cleaner and install new hose number 19 where shown in Figure 5.

Route all hoses carefully through engine compartment. Secure valve (2v) onto PCV hose with holder (clip) supplied.

Reinstall air cleaner assembly and spare tire.

Confirm proper operation of bowl vent system.

Metering Rod, Carburetor > < Carburetor - Surging After Hot Restart|Page 1379