Do Not Sell My Personal Information
subaru Workshop Repair Guides

Subaru Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 1
background image

Wheel Hub: Service and Repair
Front

1.

Apply parking brake, then loosen wheel lug nuts.

2.

Remove grease cap and cotter pin, then loosen axle castle nut.

3.

Raise and support front of vehicle.

4.

Remove wheel and tire assembly.

5.

Unfasten caliper and position aside, leaving brake line attached.

6.

Remove caliper mounting bracket.

7.

Remove axle castle nut and washer, then the hub and rotor assembly.

8.

Reverse procedure to install.

Transmission and Drivetrain > Drive Axles, Bearings and Joints > Wheel Hub > Component Information > Service and Repair > Front

< PREV PAGE NEXT PAGE >